-
Products+
-
Products
- New Products
- AV over IP Solutions
- Unified Communication & Collaboration Solutions
- Digital Video Processing Solutions
- Control Systems & Software
- Matrix Switchers
- HDMI Switchers
- HDMI Distribution Amplifiers
- Wireless AV Solutions
- HDMI over CAT6 Extenders
- HDMI Fixers & Boosters
- HDMI Cables
- Active Optical HDMI Fiber Cables
- Audio Solutions
- Accessories
-
Key Digital AV Over IP Systems
- AV Over IP Systems Overview
- AV Over IP Products
- DIY AV Over IP Systems
- Control Apps and Software
-
-
Markets & Solutions+
- KD University
-
Resources+
- About Us+
- Contact+
KD-X444S
HDMI over 40m CAT6 HDBaseT Extender Set. DISCONTINUED - SUGGESTED REPLACEMENT KD-X444SP.
Extends 4K 18Gbps signals up to 130ft / 40m and 1080p signals up to 230ft / 70m
Supports 4K HDMI signals up to 18Gbps with HDR, HDCP 2.2, and surround audio up to Dolby® 7.1 and Atmos / DTS-HD
Kit includes transmitter, receiver, power supply, IR emitter, and IR sensor
Only requires power supply on one unit
Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2
Email Sales or call us or at +1 914-667-9700 Opt2
where to purchase
introduction
KD-X444S is an HDCP2.2 compliant long range HDBaseT kit (Tx + Rx) with support of 18Gbps 4K/UHD signal extension for the latest digital video standards. In addition to HDMI video and audio signals, KD-X444S carries IR and RS-232 for controlling remotely located equipment.
Features
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
- Low Profile: Super slim chassis design
- Signal Extension: 4K/UHD up to 130 ft (40m) using CAT5e/6. 1080p up to 230 ft. (70m) maximum (Valens VS10)
- IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Surround Audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
Additional Features
- HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant+
- 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- CEC Pass-thru: For inter-device control between input and output HDMI channel
- EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx -Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
- Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
downloads
Hires Photos
Operation Manual
Catalog Page
Diagrams
Application Example
videos
case studies
Atlanta History Museum
specifications
Technical:
- Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
- Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232
- Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232
- Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
- Bandwidth: TMDS bandwidth 18Gbps
- Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
- DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
- HDMI Connector: Type A, 19 Pin Female
- RJ45 Connector: Shielded Link Connector, HDBaseT
- IR Connector: 4-pin Phoenix
- RS-232 Connector: 3-pin Phoenix
- Power: (1) 12V/1.66A, 20W DC Power Supply (Screw-In Type).
100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector.
SKU: KD-PS20W12VQ
- Regulation: CE, RoHS, WEEE, EAC
- Enclosure: Black Metal
- Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs
accessories
- Power Supply (qty 1) 12V/1.66A, 20W, desktop type, model KDSP20W12VC
- Mounting Brackets (qty 4)
- IR Emitter with stripped wire. Stripe = IR Signal, Solid = Ground. Model KDIRE3501F1 (qty 1)
- IR Sensor with stripped wire. Red = +5V Sensor power, Black = Ground, White = IR Signal. Model KDIRSR001 (qty 1)
- 3-pin Phoenix Connector (qty 2)
- 4-pin Phoenix Connector (qty 2)
technical documents
Hires Photos
Operation Manual
Catalog Page
videos
Key Digital University Tech Training- KD-X444L & KD-X444S
Key Digital University Sales Training - KD-X444L & KD-X444S
Images and Diagrams
Application Example
specifications
Technical:
- Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
- Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232
- Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232
- Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
- Bandwidth: TMDS bandwidth 18Gbps
- Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
- DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
- HDMI Connector: Type A, 19 Pin Female
- RJ45 Connector: Shielded Link Connector, HDBaseT
- IR Connector: 4-pin Phoenix
- RS-232 Connector: 3-pin Phoenix
- Power: (1) 12V/1.66A, 20W DC Power Supply (Screw-In Type).
100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector.
SKU: KD-PS20W12VQ
- Regulation: CE, RoHS, WEEE, EAC
- Enclosure: Black Metal
- Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs
accessories
- Power Supply (qty 1) 12V/1.66A, 20W, desktop type, model KDSP20W12VC
- Mounting Brackets (qty 4)
- IR Emitter with stripped wire. Stripe = IR Signal, Solid = Ground. Model KDIRE3501F1 (qty 1)
- IR Sensor with stripped wire. Red = +5V Sensor power, Black = Ground, White = IR Signal. Model KDIRSR001 (qty 1)
- 3-pin Phoenix Connector (qty 2)
- 4-pin Phoenix Connector (qty 2)
