KD-DA2x8G

HDMI Switcher Splitter over CAT6 Set

  • Switch between two HDMI sources with push button or free app

  • Sends selected source to 8 video displays up to 328ft / 100m away

  • Kit includes all 8 Rx units

  • De-embeds audio from selected source


Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2
unit price
$xxxx.xx
quantity
add to cart

introduction

Key Digital’s KD-DA2x4G and KD-DA2x8G are 18Gbps and HDCP2.2 supporting HDMI Switcher + Distribution Amplifier kits with HDBaseT output and 4/8 Rx units included. The KD-DA2x4G/KD-DA2x8G kit is designed for applications such as Digital Signage and other professional AV installation types, where the selected HDMI source is distributed to up to 4/8 displays. All connected displays show the same image at the same time. The 4/8 KD-XDALRx HDBaseT Rx extenders are all powered via HDBaseT from the KD-DA2x4G/2x8G unit, and support extension of resolutions up to UHD/4K up to 250 ft. (76m) using CAT5e/CAT6/CAT6A/CAT7. 1080p resolutions may be extended up to 328 ft. (100m). KD-DA2x4G/KD-DA2x8G is easily integrated into professional AV systems with the audio from the selected source being de-embedded on analog and digital audio connectors, and switching controllable via TCP/IP, RS-232 or IR. KD-DA2x4G/KD-DA2x8G is Key Digital App ready and also controllable by control systems such as Compass Control Pro. EDID handshaking is easily selected via front panel rotary dial and all UHD/4K EDID handshake files include HDR header information.

Features

  • HDMI Switching & Distribution: 2 HDMI sources to 8 HDBaseT outputs
  • Power over HDBaseT: All included Rx units powered by the main unit
  • UHD/4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
  • Signal Extension: For resolution and cable quality
  • 4K/UHD: Up to 250 ft. (76m) using CAT5e/CAT6/CAT6A/CAT7
  • 1080p: Up to 328 ft. (100m) maximum
  • 18 Gbps Bandwidth: High Speed / Performance for latest HDMI standards
  • High Dynamic Range (HDR) Format Support: HDR10 and Dolby® Vision
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • Resolution Support: Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) up to 4096x2160p
  • Deep Color Support: Up to UHD/4K 60Hz 4:2:0/12 bits, 60Hz 4:2:2/12 bits
  • Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source via hot plug detection voltage when enabled
  • Audio De-embedder: Audio of the selected HDMI input is de-embedded at the Coax digital (PCM) and Analog L/R balanced/unbalanced connectors
  • Control Pass-Thru: 8 three pin phoenix connectors for bi-directional IR or RS-232 for each HDBaseT output. 8 IR sensors and IR emitters included
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
  • EDID: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from an Output/Display 1
  • Lossless Compressed Digital Audio: Dolby® TrueHD, Dolby® Digital Plus, DTS-HD Master Audio™, and Dolby® Atmos
  • CEC Disconnect: Prevents all device communication signals via CEC, ARC, and HDMI Ethernet channels
  • Control: Front panel buttons/LEDs, Serial IR, Optical IR, RS-232 Control, and TCP/IP Control 
  • Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
  • Key Digital® App & KDMS® Pro Ready: Scan & detect population for pre-built GUI and TCP/IP control via Key Digital® iOS App and Key Digital Management Software™ Pro (KDMS™ Pro) PC Software 

Additional Features

  • High Dynamic Range (HDR) Format Support: HDR10 and Dolby® Vision -HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant

  • Deep Color Support: Up to UHD/4K 60Hz 4:2:0/12 bits, 60Hz 4:2:2/12 bits

  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake

  • EDID: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from an Output/Display 1

  • Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.

downloads

Operation Manual
Quick Setup Guide
Catalog Page
Hires Photo

Diagrams

Application Example

videos

control drivers

Elan
Control4
URC

specifications

Technical:
  • Inputs (2): 1 HDMI Connector, Type A, 19 Pin Female
  • Outputs (4/8): 1 HDBaseT, Valens VS100 Class A, RJ45 Female
  • Output (1): RCA female for digital audio following SPDIF format (IEC 60958). Supports sampling rate up to 192KHz; Balanced/unbalanced line level audio on 6-pin terminal block. Drives 2VRMS line audio input with a sampling rate of 48KHz
  • Control Pass-Thru (Main Unit): 3-Pin Terminal Block for IR or RS-232 supporting voltage levels from +0.1V to +12V
  • Control (Rx Unit): IR In and Out on Phoenix Connector 5V IR sensor power. RS-232 on 3-Pin Phoenix connector
  • Wired IR: modulated IR signal input, 0-5V TTL or -10 to +10V
  • Analog Audio Max Output Level: 4dBu on 150kΩ, DC coupling 
  • Audio Bandwidth: 20Hz to 20kHz @ 0dBu 
  • TND + Noise: 0.33% @0dBu @ 1kHz » PCM Max Input Level: 1Vpp on 75Ω, AC coupling
  • PCM Max Output Level: 1Vpp on 75Ω, DC coupling 
  • DDC Communication: EDID and HDCP Bi-directional buffering to Display and Source 
  • Wired IR: modulated IR signal input, 0-5V TTL or -10to +10V
  • Power: +48V/1.66A, 80W 
General:
  • Regulation: CE, RoHS, WEEE, EAC 
  • Rack Mount: 1U, 1 Rack Width (rack ears included)
  • Enclosure: Black Metal 
  • Product Dimensions: 17.3 x 5.25 x 1.72” (440 x 133.5 x 43.8 mm)
  • Shipping Carton Dimensions: 20 x 10 x 5.7” (510 x 255 x 145 mm) 
  • Product Weight: 6 lb 
  • Shipping Weight: 9 lb
  • Accessories: IR Remote, UL Certified Power Supply

accessories

  • Power Supply (qty 2) 48V/1.66A, 80W, desktop type, model KDSP80W48VC
  • Rack ears and screws
  • KD-RMSWPROK remote control 
  • Qty 4/8 IR Emitters
  • Qty 4/8 IR Sensors
  • Qty 5/9 3-pin terminal blocks for IR/RS-232
  • 6-pin terminal block for analog audio
  • Quick Setup Guide

specifications

Technical:
  • Inputs (2): 1 HDMI Connector, Type A, 19 Pin Female
  • Outputs (4/8): 1 HDBaseT, Valens VS100 Class A, RJ45 Female
  • Output (1): RCA female for digital audio following SPDIF format (IEC 60958). Supports sampling rate up to 192KHz; Balanced/unbalanced line level audio on 6-pin terminal block. Drives 2VRMS line audio input with a sampling rate of 48KHz
  • Control Pass-Thru (Main Unit): 3-Pin Terminal Block for IR or RS-232 supporting voltage levels from +0.1V to +12V
  • Control (Rx Unit): IR In and Out on Phoenix Connector 5V IR sensor power. RS-232 on 3-Pin Phoenix connector
  • Wired IR: modulated IR signal input, 0-5V TTL or -10 to +10V
  • Analog Audio Max Output Level: 4dBu on 150kΩ, DC coupling 
  • Audio Bandwidth: 20Hz to 20kHz @ 0dBu 
  • TND + Noise: 0.33% @0dBu @ 1kHz » PCM Max Input Level: 1Vpp on 75Ω, AC coupling
  • PCM Max Output Level: 1Vpp on 75Ω, DC coupling 
  • DDC Communication: EDID and HDCP Bi-directional buffering to Display and Source 
  • Wired IR: modulated IR signal input, 0-5V TTL or -10to +10V
  • Power: +48V/1.66A, 80W 
General:
  • Regulation: CE, RoHS, WEEE, EAC 
  • Rack Mount: 1U, 1 Rack Width (rack ears included)
  • Enclosure: Black Metal 
  • Product Dimensions: 17.3 x 5.25 x 1.72” (440 x 133.5 x 43.8 mm)
  • Shipping Carton Dimensions: 20 x 10 x 5.7” (510 x 255 x 145 mm) 
  • Product Weight: 6 lb 
  • Shipping Weight: 9 lb
  • Accessories: IR Remote, UL Certified Power Supply

accessories

  • Power Supply (qty 2) 48V/1.66A, 80W, desktop type, model KDSP80W48VC
  • Rack ears and screws
  • KD-RMSWPROK remote control 
  • Qty 4/8 IR Emitters
  • Qty 4/8 IR Sensors
  • Qty 5/9 3-pin terminal blocks for IR/RS-232
  • 6-pin terminal block for analog audio
  • Quick Setup Guide