KD-MLV4x2Pro

DISCONTINUED. REPLACED BY KD-MLV4x4Pro. 4x2 HDMI VGA HDBaseT Seamless Presentation Matrix Switcher and Multi-View Tiling Processor with Audio De-Embed, POH. Includes 1 Rx Extender. KD-App Ready.


Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2
unit price
$xxxx.xx
quantity
add to cart

introduction


Features

DISCONTINUED. REPLACED BY KD-MLV4x4Pro.  

  • Multi-view and Tiling Processor: Create & store custom multi-view layouts, recall custom presets in 1080p (2K) Multi-view mode

    • Quadrant Mode (4K or 2K): Independent outputs in four equally-sized windows

    • Multi-view Mode (2K): Linked/mirrored outputs in customized screen layout

  • Seamless Switching: Un-interrupted screen transitions during source selections

  • Independent matrix switching: In full-screen and quadrant modes, linked/mirrored in multi-view mode

  • Image Layering: Stack images with customizable priority settings

  • Window Transparency and Border: View content through each other and choose window bezel width and coloring

  • Multi-format Switch:

    • Input: 2 HDMI, 2 HDMI or Analog video, all with external audio

    • Output:  1 HDMI and 1 HDBaseT output. Rx unit included 

  • HDBaseT Built-In: Included KD-X222PORx unit is powered by at KD-MLV4x2Pro

  • Signal Extension:

    • Up to 200 feet @ 1080p/60, 1080p/24, 1080i, 720p with third-party CAT5e/6

    • Up to 125 feet @ 4096x2160 30Hz [4:4:4] 8bit with third-party CAT5e/6

  • Ultra HD/4K Up-scaling: Outputs independently upscale to 4096x2160 30Hz [4:4:4] 8bit in 4K Quadrant mode

  • HDCP 2.2 Licensing: Fully licensed and compatible with HDCP 2.2

  • Resolution Support: Supports SD, HD, and VESA input resolutions up to 1080p / 1920x1200 on HDMI and analog video Inputs. Outputs fixed to 1080p or 4K

  • Web Control Interface: Reduces installation time and provides basic and advanced video and audio setup

  • Audio De-Embed: Audio from the selected input is be de-embedded through the Coax digital (PCM) output in addition to the HDMI output

  • Independent Video & Audio: Listen to any audio source while in quadrant or multi-view modes

  • Dolby Digital & DTS Audio: Supports 2-channel and multi-channel audio formats up to 5.1 Dolby® / DTS™ lossless compressed digital surround sound

  • Analog to Digital Video Conversion: Analog video input ports support VGA / DB15 or Component / YPbPr signal types

  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake

  • EDID: Internal library with 5 default EDID configurations for input, in addition to native EDID data for any Output / Display

  • TMDS Re-clocking: Support for long HDMI connectivity using Key Digital® HDMI cables

  • Deep Color Support: Up to 12 bits/color

  • Control: Front panel buttons, IR, RS-232, TCP-IP and Web Control

  • Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.

  • Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® App

Additional Features


downloads

Custom Presets Quick Guide
Common Custom Presets
Catalog Page
Operation Manual
Hires Photo

Diagrams

Diagram

videos

control drivers

Pronto Hex
Control4 Driver
Savant Profile

case studies

The Ultimate Picture-IN-Picture Processor with 6 View Modes

specifications

Technical:

  • Inputs: 4 HDMI connectors, Type A, 19 pin female; 2 HD analog video 15-pin female, 4 analog audio connector, 3.5mm stereo female
  • Outputs: 1 HDMI connector, Type A, 19 pin female; 1 HDBaseT RJ45 female; 2 digital coaxial audio on RCA connector, female, follows SPDIF format IEC 60958; 2 Analog balanced/unbalanced 6-pin terminal block
  • TMDS Bandwidth: 9 Gb/s tota
  • Deep Color Support: Supports digital video formats in Deep Color Mode up to 8 bits/color with all HDMI and HDCP technologies
  • Link: Single Link
  • DDC Signal (Data): Input DDC signal – 5 Volts p-p (TTL)
  • HDMI Video/Audio Signal: 1.2 Volts p-p
  • DDC Communication: EDID And HDCP buffering between source and display
  • Wired IR: Modulated IR signal input, 0-5V TTL or -10 to +10V, 3.5mm mono female connector with signal on tip
  • Power: External power supply; 12V/3A

General:

  • Regulation: CE, RoHS, WEEE
  • Rack Mount: 1U, full rack-width (rack ears included)
  • Accessories: Rack Ears
  • Product: 17.25” x 8.875” x 1.75”; Weight: 6.5 lbs
  • Packaging: 18.5” x 13” x 3.5”; Weight: 8.8 lbs

accessories

  • Power Supply (qty 1) 12V/5A, 60W, desktop type, model KDSP60W12VC
  • IR Remote Control: KD-RMMLV
  • Rack ears
  • Operating Instructions
  • Warranty Card

specifications

Technical:

  • Inputs: 4 HDMI connectors, Type A, 19 pin female; 2 HD analog video 15-pin female, 4 analog audio connector, 3.5mm stereo female
  • Outputs: 1 HDMI connector, Type A, 19 pin female; 1 HDBaseT RJ45 female; 2 digital coaxial audio on RCA connector, female, follows SPDIF format IEC 60958; 2 Analog balanced/unbalanced 6-pin terminal block
  • TMDS Bandwidth: 9 Gb/s tota
  • Deep Color Support: Supports digital video formats in Deep Color Mode up to 8 bits/color with all HDMI and HDCP technologies
  • Link: Single Link
  • DDC Signal (Data): Input DDC signal – 5 Volts p-p (TTL)
  • HDMI Video/Audio Signal: 1.2 Volts p-p
  • DDC Communication: EDID And HDCP buffering between source and display
  • Wired IR: Modulated IR signal input, 0-5V TTL or -10 to +10V, 3.5mm mono female connector with signal on tip
  • Power: External power supply; 12V/3A

General:

  • Regulation: CE, RoHS, WEEE
  • Rack Mount: 1U, full rack-width (rack ears included)
  • Accessories: Rack Ears
  • Product: 17.25” x 8.875” x 1.75”; Weight: 6.5 lbs
  • Packaging: 18.5” x 13” x 3.5”; Weight: 8.8 lbs

accessories

  • Power Supply (qty 1) 12V/5A, 60W, desktop type, model KDSP60W12VC
  • IR Remote Control: KD-RMMLV
  • Rack ears
  • Operating Instructions
  • Warranty Card