KeyDigital Logo
Unified Communication & Collaboration Solutions > Presentation Switchers and Tiling Processors

KD-PS42

4K/18G Presentation Switcher with 4 Inputs (HDBaseT, 3x HDMI), 2 Mirrored Outputs (HDBaseT, HDMI), Audio De-Embed, IR, RS-232, IP, CEC Manager™. Includes Rx.


Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700
unit price
$xxxx.xx
quantity
1
add to cart
overview
resources
specS & accessories

introduction


Features

  •  Presentation Switcher Kit: Includes KD-PS42 and KD-X40MRx. Add KD-X2x1WDTx or KD-2x1WVTX wall plate HDBaseT transmitter for plug-in on walls, floor and table boxes
  • Presentation Switching: 3 HDMI, 1 HDBaseT source selection by push button, IP, RS-232, IR, auto switching, or trigger control
  • Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
  • Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
  • CEC Manager™: Power, volume, and muting controls of the connected display/ projector without any additional control wiring. Selection of desired CEC command recipient
  • Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors
  • KD-AMP220 Control Mode: Command forward to KD-Amp220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
  • HDCP Licensing: Fully licensed and compatible with HDCP 2.2
  • HDR10: More life-like images through a greater range of luminance levels
  • Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-PS42
  • Installation: Half-rack width with rack mounting ears included
  • Signal Extension: For resolution and cable quality 
  • 4K/UHD (18G): Up to 40m /131ft
  • 1080p: Up to 70m / 230ft 
  • Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, EDID Control handshake, and Hot Plug Detection Voltage
  • EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
  • RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit 
  • Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit 
  • EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the output/display 1
  • Digital Audio Format Support: DTS-HD Master Audio™, DTS:X®, Dolby TrueHD®, Dolby Atmos®
  • Control System Support: Fully controllable by all TCP/IP and RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, etc.
  • KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager™

Additional Features


downloads

UCC Product Power Supplies
PS42 Cam Amp Wiring
Manual
Quick Setup Guide
Catalog Page
Hires Image

Diagrams

RS-232 Diagram KD-Amp220 Control
RS-232: PS + Cam + Amp
Board Room Application
Training Room Application
Classroom Application
Conference Room Application
Lecture Hall Application
Application Example

videos

Cedia 2019 Day 1
Presentation Solutions Product Category
Infocomm 2019 Day 1: Presentation Solution Product Category
Key Digital Highlights- KD-PS42
Presentation Switcher Firmware Upgrade Procedure

specifications

  • Technical

    ·         AV Inputs: 1x HDBaseT RJ45, 3x HDMI

    ·         AV Outputs: 1x HDBaseT RJ45, 1x HDMI, 1x Analog Audio on 6-pin terminal block, 1x Digital Audio on PCM RCA

    ·         DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)

    ·         HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p

    ·         RJ45 Connectors: Shielded Link Connector, 2x HDBaseT, 1x LAN

    ·         Unit Control: TCP/IP on RJ45, Bi-directional RS-232, Serial IR, IR sensor, USB Micro

    ·         RS-232 Connector: 1x 3-pin terminal for unit control, 2x 3-pin terminal for pass-thru to/from HDBaseT Input and HDBaseT output

    ·         IR Connectors: 1x IR Sensor, 1x 2-pin terminal for unit control, 1x 3.5mm mono for IR input pass-thru to HDBaseT Output, 1x 3.5mm mono for IR output pass-thru from HDBaseT Output

    ·         RS-232 Connector: 3-pin phoenix terminal

    General

    ·         Regulation: CE, RoHS, WEEE, EAC

    ·         Enclosure: Black metal

    ·         Product Dimensions: 8.27 x 6.42 x 1.75” (210 x 163 x 44.4mm)

    ·         Product Weight:  Weight: 3.5 lbs / 1.59kg

    ·         Packaging Dimensions: 15.16 x 9.10 x 3.94 (385 x 230 x 100 mm)

    ·         Packaging Weight: 11.0 lbs / 5kg

accessories

  • Power Supply (qty 1) 48V/1.04A, 50W, desktop type, model KDPS50W48VC
  • Operation User Manual (qty 1) 
  • Remote Control: KD-RMPS (qty 1) includes battery 
  • Rack Ear Mount of PS42 (qty 2) 
  • Rack Ear Mount Screw of PS42 (qty 4) 
  • Half Rack Ear Mount of PS42 (qty1)
  • Table Top Ear Mount of PS42 (qty 2) 
  • Table Top Ear Mount screw of PS42 (qty 4)
  • RX Extender (KD-X40MRX) (qty 1)
  • Wall Ear Mount of X40MRX (qty 2)
  • Wall Ear Mount screw of X40MRX (qty 4)
  • 6 Pos. Blue Color Terminal Block Plug (F73-5-30600060) (qty 1)
  • 6 Pos. Green Color Terminal Block Plug (F73-5-30600050) (qty 1) 
  • 3 Pos. Green Color Terminal Block Plug (F73-5-30300050) (qty 2)
  • 6FT USB B to USB A (USB 2.0) Data Cable (qty 1) 
  • 6FT Micro USB to USB A (USB 2.0) Data Cable (qty 1) 
  • IR Emitter (3.5mm mono type) (qty 1) Key Digital 
  • IR Sensor (3.5mm stereo type) (qty 1) Key Digital 

downloads

UCC Product Power Supplies
PS42 Cam Amp Wiring
Manual
Quick Setup Guide
Catalog Page
Hires Image

Diagrams

RS-232 Diagram KD-Amp220 Control
RS-232: PS + Cam + Amp
Board Room Application
Training Room Application
Classroom Application
Conference Room Application
Lecture Hall Application
Application Example

videos

Cedia 2019 Day 1
Presentation Solutions Product Category
Infocomm 2019 Day 1: Presentation Solution Product Category
Key Digital Highlights- KD-PS42
Presentation Switcher Firmware Upgrade Procedure

specifications

  • Technical

    ·         AV Inputs: 1x HDBaseT RJ45, 3x HDMI

    ·         AV Outputs: 1x HDBaseT RJ45, 1x HDMI, 1x Analog Audio on 6-pin terminal block, 1x Digital Audio on PCM RCA

    ·         DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)

    ·         HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p

    ·         RJ45 Connectors: Shielded Link Connector, 2x HDBaseT, 1x LAN

    ·         Unit Control: TCP/IP on RJ45, Bi-directional RS-232, Serial IR, IR sensor, USB Micro

    ·         RS-232 Connector: 1x 3-pin terminal for unit control, 2x 3-pin terminal for pass-thru to/from HDBaseT Input and HDBaseT output

    ·         IR Connectors: 1x IR Sensor, 1x 2-pin terminal for unit control, 1x 3.5mm mono for IR input pass-thru to HDBaseT Output, 1x 3.5mm mono for IR output pass-thru from HDBaseT Output

    ·         RS-232 Connector: 3-pin phoenix terminal

    General

    ·         Regulation: CE, RoHS, WEEE, EAC

    ·         Enclosure: Black metal

    ·         Product Dimensions: 8.27 x 6.42 x 1.75” (210 x 163 x 44.4mm)

    ·         Product Weight:  Weight: 3.5 lbs / 1.59kg

    ·         Packaging Dimensions: 15.16 x 9.10 x 3.94 (385 x 230 x 100 mm)

    ·         Packaging Weight: 11.0 lbs / 5kg

accessories

  • Power Supply (qty 1) 48V/1.04A, 50W, desktop type, model KDPS50W48VC
  • Operation User Manual (qty 1) 
  • Remote Control: KD-RMPS (qty 1) includes battery 
  • Rack Ear Mount of PS42 (qty 2) 
  • Rack Ear Mount Screw of PS42 (qty 4) 
  • Half Rack Ear Mount of PS42 (qty1)
  • Table Top Ear Mount of PS42 (qty 2) 
  • Table Top Ear Mount screw of PS42 (qty 4)
  • RX Extender (KD-X40MRX) (qty 1)
  • Wall Ear Mount of X40MRX (qty 2)
  • Wall Ear Mount screw of X40MRX (qty 4)
  • 6 Pos. Blue Color Terminal Block Plug (F73-5-30600060) (qty 1)
  • 6 Pos. Green Color Terminal Block Plug (F73-5-30600050) (qty 1) 
  • 3 Pos. Green Color Terminal Block Plug (F73-5-30300050) (qty 2)
  • 6FT USB B to USB A (USB 2.0) Data Cable (qty 1) 
  • 6FT Micro USB to USB A (USB 2.0) Data Cable (qty 1) 
  • IR Emitter (3.5mm mono type) (qty 1) Key Digital 
  • IR Sensor (3.5mm stereo type) (qty 1) Key Digital 
purchased together
KD-BKTHF
Half Rack Mount Bracket Adapter
KD-WP8
8 Button Web UI Programmable IP Control Wall Plate Keypad with PoE for KDPlug & Present™, Compass Control® Pro, and Third-Party Systems via Open API. DISCONTINUED: REPLACED BY KD-WP8-2
KD-X2x1WVTx
HDMI VGA over 40m CAT6 HDBaseT Wall Plate Transmitter
KD-X2x1WDTx
2x1 4K/18G 40m HDBT PoH Wall Plate Switcher with HDMI & DisplayPort, IR, RS-232 (Tx Only)
KD-AMP220
2 Ch 20 WPC @ 8 Ohm, 40 WPC @ 4 Ohm, Compact Digital Amplifier
similar products
KD-Pro4x1X
4x1 4K/18G HDMI Switcher with De-Embedded Audio Output (Optical/Balanced Audio) and IP Control - DISCONTINUED: replaced with KD-Pro4x1X-2
KD-BYOD4K
4K KDPlay Wireless Presentation Gateway for PC, Mac, iOS, Android and Chrome OS devices. Full and Multi-Presenter Viewing Modes. Screen Mirroring via LAN or WiFi with built-in Antenna. Power over Ethernet, HDMI and Analog Audio Output, USB Keyboard, Mouse, and Annotation Control. Includes USB Auto-Launch Flash.
KD-UPS52U
4K/18G USB/Universal Presentation Switcher with 5 Inputs (HDBaseT, 2x HDMI, DP, USB-C), 2 Mirrored Outputs (HDBaseT, HDMI), LAN, ARC, Audio De-Embed, IR, RS-232, IP Control, USB 2.0 KVM, CEC Manager™. Includes Rx.
KD-UFS42
4K 18G (40m) Universal Format Switcher with 4 Inputs (2x HDMI, DP, VGA), HDMI and HDBaseT Mirrored Outputs with Rx Included, Audio De-Embed, CEC Display Control, Auto Switching. KD-App and KDPlug & Present™ Ready.
KD-App
Access and Control Key Digital® App Ready products via TCP/IP directly with Key Digital® iOS App. FREE Download from the App Store.