KD-UPS52U

4K/18G USB/Universal Presentation Switcher with 5 Inputs (HDBaseT, 2x HDMI, DP, USB-C), 2 Mirrored Outputs (HDBaseT, HDMI), LAN, ARC, Audio De-Embed, IR, RS-232, IP Control, USB 2.0 KVM, CEC Manager™. Includes Rx.

Features Downloads Videos Specifications Diagrams Accessories Control Drivers Case Studies Related Products

Presentation Switcher Kit: Includes KD-UPS52U and KD-X100MRx. Add KD-X4x1WUTx wall plate HDBaseT Tx for plug-in on walls, floor and table boxes
Presentation Switching: 1 HDBaseT, 2 HDMI, 1 Display Port, 1 USB-C source selection by push button, IP, RS-232, IR, auto switching, or trigger control
Soft-Codec & KVM Enabling System: USB Host + Device ports create connectivity hub for professional USB cameras and microphones, audio DSP, keyboard, mouse, or touchscreen display with connected computer
PTZ USB Camera Integration: Integrates natively with KD-CAMUSB for full PTZ control via KD-App and more
Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
CEC Manager™: Power, volume, and muting controls of the connected display/ projector without any additional control wiring. Selection of desired CEC command recipient
Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors
ARC / eARC: Audio may be returned from the connected display or Rx (KD-X100MRx) unit and output on the external analog & digital outputs
KD-AMP220 Control Mode: Command forward to KD-AMP220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
HDCP Licensing: Fully licensed and compatible with HDCP 2.2
HDR10: More life-like images through a greater range of luminance levels
Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-UPS52U
Installation: Half-rack width with rack mounting ears included
Signal Extension: For resolution and cable quality
4K/UHD (18G): Up to 100m / 328ft
1080p: Up to 150m / 492ft
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, EDID Control handshake, and Hot Plug Detection Voltage
EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit
Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
Control System Support: Fully controllable by all TCP/IP and RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager

Operation Manual Quick Setup Guide Catalog Page Hires Image

Technical

AV Inputs: 2x HDMI, 1x Display Port, 1x USB-C,
AV Outputs: 1x HDBaseT RJ45, 1x HDMI, 1x Analog Audio on 6-pin terminal block, 1x Digital Audio on PCM RCA
DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
Display Port Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
USB-C Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
RJ45 Connectors: Shielded Link Connector, 2x HDBaseT, 1x LAN
Unit Control: TCP/IP on RJ45, Bi-directional RS-232, Serial IR, IR sensor, USB Micro
RS-232 Connector: 1x 3-pin terminal for unit control, 2x 3-pin terminal for pass-thru to/from HDBaseT Input and HDBaseT output
IR Connectors: 1x IR Sensor, 1x 2-pin terminal for unit control, 1x 2-pin terminal for IR pass-thru to HDBaseT Input, 1x 3.5mm mono for IR input pass-thru to HDBaseT Output, 1x 3.5mm mono for IR output pass-thru from HDBaseT Output
RS-232 Connector: 3-pin phoenix terminal

General

Regulation: CE, RoHS, WEEE, EAC
Enclosure: Black metal
Product Dimensions: 8.27 x 7.20 x 1.75” (210 x 183 x 44.4 mm)
Product Weight: Weight: 4.0 lbs / 1.81 kg
Packaging Dimensions: 15.16 x 9.10 x 3.94 (385 x 230 x 100 mm)
Packaging Weight: 11.0 lbs / 5 kg

RS-232: UPS + Cam + Amp Conference Room Application Training Room Application Lecture Hall Application Board Room Application Huddle Space Application Application Example