KD-IP1080Tx

HDMI over IP with POE (Tx) Transmitter with Redundant Power Connection, HDMI Pass-through

Features Downloads Videos Specifications Diagrams Accessories Control Drivers Case Studies Related Products

Enterprise AV over IP Solutions

Key Digital’s Enterprise AV over IP Encoders and Decoders create expandable HDMI over IP systems that can be scaled to fit any commercial installation. system overview

Enterprise AV over IP - Verified/Supported Network Switches

List of Verified/Supported Network Switches & Setup Instructions (PDF)

System Configuration PC Software - Key Digital® Management Software Pro (KDMS Pro)

Configure units, build virtual matrix systems, add video walls, and manage video routing
Learn More about Key Digital® Management Software Pro (KDMS Pro)

KD-IP1080Tx/Rx Usage Modes

Digital Video Matrix

Digital Video Distribution System

Digital Video Switcher

Digital Video Extender

IP Control Expansion

Features

Connectivity: Can be connected through a network IP switch or point-to-point
H.264 Compression: Ideal standard for large video distribution applications
Low-bandwidth System: Supports managed 100BaseT or Gigabit network switches
Custom System: Add Tx and Rx extenders to an existing system to expand HDMI over IP up to 1024 Tx units and unlimited amount of Rx units
Power Over Ethernet: Carry power to Tx and Rx units with a Power Over Ethernet enabled Smart Managed Switch
HDMI Pass-through: Tx unit support HDMI Pass-through to receive video or extract audio on the transmit side
Alternative Extension Methods: Enabled by low-bandwidth data streaming technology
- Wifi Extender: Up to 100 ft.
- IP over Coaxial: Up to 1000 ft.
Resolution Support: Supports up to 1080p@60 (2.25Gbps) and compatible with DVI1.0/HDMI/HDCP1.x
Audio Format: Supports 2ch PCM at 44.1/48kHz
Data Stream Bandwidth: < 15Mbps.
Signal Extension: Up to 400 ft. @ 1080p@60 (2.25Gbps) using CAT5e/6 UTP/ STP cable
Web Control Interface: Reduces installation time and provides basic video setup.
Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
EDID: EDID libraries readily available to provide the best setup per source
Deep Color Support: Up to 12 bits/color
TMDS re-clocking: Support for long HDMI runs using Key Digital® HDMI cables
Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDMI 1.4 and HDCP 1.4
Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
Source/Display Control: Integrate with KD-CX800 to add 3 IR, RS-232 or Trigger ports
Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® App
Control App Stabilization: One KD-CX800 or KD-MC1000 recommended to act as a gateway and increase reliability from KD-App control

AVoIP KD-IP1080 Configuration Questionnaire Elan 20x22 Matrix ESR Hires Image Verified Network Switches List Key Digital Management Software™ Pro Catalog Page Unit and System Setup using KDMS™ Pro Software Operation Manual

Technical:

Tx Input: 1 HDMI Connector, Type A, 19 Pin Female
Tx Output: 1 HDMI Connector, Type A, 19 Pin Female; 1 CAT5e/6 on RJ45
Rx Input: 1 CAT5e/6 on RJ45
Tx Output: 1 HDMI Connector, Type A, 19 Pin Female
TMDS Bandwidth: 2.25 Gb/s per Channel
Deep Color Support: Supports digital video formats in Deep Color Mode up to 12 bits/color
Link: Single Link
DDC Signal (Data): Input DDC signal – 5 Volts p-p (TTL)
HDMI Video/Audio Signal: 1.2 Volts p-p
DDC Communication: EDID and HDCP buffering between source and display
Power: KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head, screw-in connector. KD-IP1080POE POE power consumption ≤ 6 watts per unit