-
Products+
-
Products
- New Products
- AV over IP Solutions
- Unified Communication & Collaboration Solutions
- Digital Video Processing Solutions
- Control Systems & Software
- Matrix Switchers
- HDMI Switchers
- HDMI Distribution Amplifiers
- HDMI over CAT5e/6 Extenders
- HDMI Fixers & Boosters
- HDMI Cables
- Active Optical HDMI Fiber Cables
- Audio Solutions
- Accessories
-
Key Digital AV Over IP Systems
- AV Over IP Systems Overview
- AV Over IP Products
- Control Apps and Software
-
-
Markets & Solutions+
- KD University
-
Resources+
- About Us+
- Where to Buy
- Contact Us
KD-X444LP
HDMI over 70m CAT6 Extender Set
Extends 4K 18Gbps and 1080p HDMI signals up to 230ft / 70m
Supports 4K HDMI signals up to 18Gbps with HDR, HDCP 2.2, and surround audio up to Dolby® / DTS-HD 5.1
Kit includes transmitter, receiver, power supply, IR emitter, and IR sensor
Only requires power supply on one unit
Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700
Email Sales or call us or at +1 914-667-9700
where to purchase
introduction
KD-X444LP is a 4K/UHD 18Gbps, HDCP2.2 compliant HDMI over CAT6 Transmitter plus Receiver set for extension of digital video signals with the latest standards in resolution, HDR, and Chroma over a single CAT cable. The Transmit unit features an HDMI pass-thru port for integration with local monitors or AV Receivers. In addition to HDMI AV, KD-X444LP carries IR or RS-232 for controlling remotely located equipment. An IR sensor and IR emitter are included, and the Tx unit’s IR Input port supports Serial IR input directly from a control system / IR block. With Power over CAT (PoC), only one power supply is needed, and it may be connected at either unit for ease of installation. KD-X444LP features Key Digital’s proprietary Full Buffer Technology software suite, with EDID handshake management, fixed hot plug detection, HDCP authentication to the connected source, and TMDS signal reclocking for installation with long cabling or many connectivity layers.
Features
Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplification depending on cabling length
4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Flexible Power over CAT (PoC): Only one power supply needed. Connect at Tx or Rx unit
Low Profile: Super slim chassis design
Signal Extension: 4K/UHD (18G) up to 230ft / 70m with CAT5e/6, up to 328ft / 100m with CAT6A STP. 1080p up to 230 ft / 70m with CAT5e/6, up to 328ft / 100m with CAT6A STP
IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Surround Audio Support
HDMI Pass-Thru supports Dolby®, Dolby® TrueHD, DTS™ and DTS-HD™ (formats up to 7.1), CAT6 Output supports Dolby®, DTS™ (formats up to 5.1/6.1)
Additional Features
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel
10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles
EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
HDCP Authentication: HDCP sources are authenticated by HDCP key on transmit unit, for one-to-one topology
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand new AV signal
downloads
Distributor Package - Text & Images
Catalog Page
Operation Manual
Quick Setup Guide
Application Diagram
Hires Image
Diagrams
Application Diagram
videos
specifications
Technical
- Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
- Outputs Tx (Each): 1 CAT6/6A, 1 HDMI pass-through, 1 IR, 1 RS-232
- Inputs Rx (Each): 1 UHDoTP, 1 IR, 1 RS-232
- Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
- Bandwidth: TMDS bandwidth 18Gbps
- Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
- DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
- HDMI Connector: Type A, 19 Pin Female
- RJ45 Connector: Shielded Link Connector, Proprietary TMDS, IR, RS-232 extension technology
- IR In & Out Connectors (Each): 3.5mm
- RS-232 Connector: 3-pin phoenix
- Power: (1) 12V/2A, 24W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS12V2ASC
General
- Regulation: CE, RoHS, WEEE, EAC
- Enclosure: Black Metal
- Product Dimensions (ea) (LxWxH): 4.3” x 4.12” x 0.82” (109.2 x 104.6 x 20.8mm)
- Product Weight (ea): 0.595 lbs (0.27 KG)
- Package Dimensions (LxWxH): 10.24” x 5.67” x 3.15” (260 x 144 x 80mm)
- Package Weight: 2.34 lbs (1.06 KG)
accessories
- 1x 12V/2A, 24W DC Power Supply (Screw-In Type). SKU: KD-PS12V2ASC
- 4x Mounting Brackets
- 1x IR Emitter
- 1x IR Sensor
technical documents
Distributor Package - Text & Images
Catalog Page
Operation Manual
Quick Setup Guide
Application Diagram
Hires Image
videos
Introducing KD-X444SP and KD-X444LP Next Generation HDMI Extender Sets
Preview: Introducing KD-X444SP and KD-X444LP Next Generation HDMI Extender Sets
Images and Diagrams
Application Diagram
technical documents
KD-X444LP Distributor Package
specifications
Technical
- Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
- Outputs Tx (Each): 1 CAT6/6A, 1 HDMI pass-through, 1 IR, 1 RS-232
- Inputs Rx (Each): 1 UHDoTP, 1 IR, 1 RS-232
- Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
- Bandwidth: TMDS bandwidth 18Gbps
- Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
- DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
- HDMI Connector: Type A, 19 Pin Female
- RJ45 Connector: Shielded Link Connector, Proprietary TMDS, IR, RS-232 extension technology
- IR In & Out Connectors (Each): 3.5mm
- RS-232 Connector: 3-pin phoenix
- Power: (1) 12V/2A, 24W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS12V2ASC
General
- Regulation: CE, RoHS, WEEE, EAC
- Enclosure: Black Metal
- Product Dimensions (ea) (LxWxH): 4.3” x 4.12” x 0.82” (109.2 x 104.6 x 20.8mm)
- Product Weight (ea): 0.595 lbs (0.27 KG)
- Package Dimensions (LxWxH): 10.24” x 5.67” x 3.15” (260 x 144 x 80mm)
- Package Weight: 2.34 lbs (1.06 KG)
accessories
- 1x 12V/2A, 24W DC Power Supply (Screw-In Type). SKU: KD-PS12V2ASC
- 4x Mounting Brackets
- 1x IR Emitter
- 1x IR Sensor