-
Products+
-
Products
- New Products
- AV over IP Solutions
- Unified Communication & Collaboration Solutions
- Digital Video Processing Solutions
- Control Systems & Software
- Matrix Switchers
- HDMI Switchers
- HDMI Distribution Amplifiers
- HDMI over CAT5e/6 Extenders
- HDMI Fixers & Boosters
- HDMI Cables
- Active Optical HDMI Fiber Cables
- Audio Solutions
- Accessories
-
Key Digital AV Over IP Systems
- AV Over IP Systems Overview
- AV Over IP Products
- Control Apps and Software
-
-
Markets & Solutions+
- KD University
-
Resources+
- About Us+
- Where to Buy
- Contact Us
KD-X444SP
HDMI over 50m CAT6 Extender Set
Extends 4K 18Gbps and 1080p HDMI signals up to 164ft / 50m.
Supports 4K HDMI signals up to 18Gbps with HDR, HDCP 2.2, and surround audio up to Dolby® / DTS-HD 5.1
Kit includes a transmitter, receiver, power supply, IR emitter, and IR sensor.
Only requires a power supply on one unit
Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700
Email Sales or call us or at +1 914-667-9700
where to purchase
introduction
KD-X444SP is a 4K/UHD 18Gbps, HDCP2.2 compliant HDMI over CAT5e/6 Transmitter plus Receiver set for extension of digital video signals with the latest standards in resolution, HDR, and Chroma over a single CAT cable. In addition to HDMI AV, KD-X444SP carries IR or RS-232 for controlling remotely located equipment. An IR sensor and IR emitter are included, and the Tx unit’s IR Input port supports Serial IR input directly from a control system / IR block. With Power over CAT (PoC), only one power supply is needed, and it may be connected at either unit for ease of installation. KD-X444SP features Key Digital’s proprietary Full Buffer Technology software suite, with EDID handshake management, fixed hot plug detection, HDCP authentication to the connected source, and TMDS signal reclocking for installation with long cabling or many connectivity layers.
Features
Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplification depending on cabling length
4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
Flexible Power over CAT (PoC): Only one power connection needed. Tx may power Rx, or Rx may power Tx.
Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel
Low Profile: Super slim chassis design
Signal Extension: For resolution and cable quality
4K/UHD (18G) / 4K 10G / 1080p with CAT5e/6: Up to 164ft / 50m
10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
HDR10 (High Dynamic Range): More life-like images through a greater range of luminance
HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles.
EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
HDCP Authentication: HDCP sources are authenticated by HDCP key on transmit unit, for one-to-one topology
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand new AV signal
Surround Audio Support: Up to Dolby®, DTS™ (formats up to 5.1/6.1)
Additional Features
-HDR10 (High Dynamic Range): More life-like images through a greater range of luminance
-HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
-Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel\
10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit -Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles.
EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
HDCP Authentication: HDCP sources are authenticated by the HDCP key on transmit unit, for one-to-one topology
Hot Plug Detection Control: Enables integrator to choose if the active signal voltage is forced to the connected display/output device
TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand-new AV signal
downloads
Catalog Page
Operation Manual
Application Example
Quick Setup Guide
Hires Photo
Diagrams
Application Example
videos
specifications
Technical
Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
- Outputs Tx (Each): 1 CAT6/6A, 1 IR, 1 RS-232
- Inputs Rx (Each): 1 UHDoTP, 1 IR, 1 RS-232
- Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
- Bandwidth: TMDS bandwidth 18Gbps
- Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
- DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
- HDMI Connector: Type A, 19 Pin Female
- RJ45 Connector: Shielded Link Connector, Proprietary TMDS, IR, RS-232 extension technology
- IR In & Out Connectors (Each): 3.5mm
- RS-232 Connector: 3-pin phoenix
- Power: (1) 12V/2A, 24W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS12V2ASC
General
Regulation: CE, RoHS, WEEE, EAC
Enclosure: Black Metal
Product Dimensions (ea) (LxWxH): 4.3” x 4.12” x 0.82” (109.2 x 104.6 x 20.8mm)
Product Weight (ea): 0.595 lbs (0.27 KG)
Package Dimensions (LxWxH): 10.24” x 5.67” x 3.15” (260 x 144 x 80mm)
Package Weight: 2.34 lbs (1.06 KG)
accessories
1x 12V/2A, 24W DC Power Supply (Screw-In Type). SKU: KD-PS12V2ASC
4x Mounting Brackets
1x IR Emitter
1x IR Sensor
downloads
Catalog Page
Operation Manual
Application Example
Quick Setup Guide
Hires Photo
Diagrams
Application Example
videos
Introducing KD-X444SP and KD-X444LP Next Generation HDMI Extender Sets
Preview: Introducing KD-X444SP and KD-X444LP Next Generation HDMI Extender Sets
specifications
Technical
Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
- Outputs Tx (Each): 1 CAT6/6A, 1 IR, 1 RS-232
- Inputs Rx (Each): 1 UHDoTP, 1 IR, 1 RS-232
- Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
- Bandwidth: TMDS bandwidth 18Gbps
- Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
- DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
- HDMI Connector: Type A, 19 Pin Female
- RJ45 Connector: Shielded Link Connector, Proprietary TMDS, IR, RS-232 extension technology
- IR In & Out Connectors (Each): 3.5mm
- RS-232 Connector: 3-pin phoenix
- Power: (1) 12V/2A, 24W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS12V2ASC
General
Regulation: CE, RoHS, WEEE, EAC
Enclosure: Black Metal
Product Dimensions (ea) (LxWxH): 4.3” x 4.12” x 0.82” (109.2 x 104.6 x 20.8mm)
Product Weight (ea): 0.595 lbs (0.27 KG)
Package Dimensions (LxWxH): 10.24” x 5.67” x 3.15” (260 x 144 x 80mm)
Package Weight: 2.34 lbs (1.06 KG)
accessories
1x 12V/2A, 24W DC Power Supply (Screw-In Type). SKU: KD-PS12V2ASC
4x Mounting Brackets
1x IR Emitter
1x IR Sensor