4K UHD AV over IP Decoder, PoE, 2x IR/RS-232 control ports
KD-IP822DEC
  • AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
  • Inter-System Compatibility: Fully compatible with KD-IP922 ENC and DEC units / systems
  • Video Wall Processing: Encoder + Decoder systems create video walls with up to 16x16, 256 total maximum displays.
  • Control: 2 multi-function ports may be used as third-party control interface, Compass Control® Pro master controller, control extension via IP, or callable via KeyCode open API
  • Key Digital® App Ready: Network scan & detect populates pre-built GUI including optional image preview, finger drag video wall management, and display control via IR.
  • KDMS Pro Ready: PC software for unit & system setup and control UI with clean End-User mode option including optional image preview, mouse-drag video wall management, and display control via IR and PJ Link IP.
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit (10.2Gbps max bandwidth)
  • 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times
  • HDR (High Dynamic Range): HDR is achieved with AppleTV source at 4K/30 [4:2:2] 12bit deep color, enabling more life-like images through a greater range of liminance levels 
  • Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point
  • Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
  • Redundant Power Connection: Added reliability for non-PoE integration. Power supply sold separately
  • Data Stream Bandwidth: < 900Mbps
  • Latency: <40ms at 4K. Less at lower resolution
  • Installation: Use KD-SMS16 to cleanly install up to twelve KD-IP822ENC/DEC units in rack
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60 f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected to Decoder
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
  • RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector
  • RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API: Compass Control® Pro, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
 
 
 
 
 
 
 

Technical:

  • Inputs KD-IP822ENC (Each): 1 HDMI, 2 In/out Multifunction Control (IR, Bi-Directional RS-232, Trigger), 1 TCP/IP 
  • Outputs KD-IP822ENC (Each): 1 HDMI, 1 AV over IP 
  • Inputs KD-IP822DEC (Each): 1 HDMI, 2 In/out Multifunction Control (IR, Bi-Directional RS-232, Trigger), 1 TCP/IP
  • Outputs KD-IP822DEC (Each): 1 HDMI
  • DDC Signal (Data): 5 Volts p-p (TTL)
  • HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
  • HDMI Connector: Type A, 19 Pin Female
  • RJ45 Connector: Shielded TCP/IP 1G/100 BaseT, PoE
  • Control Connectors: 3-Pin Phoenix 

General:

  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal
  • Power (power supply not included): KD-PS12V1ASC, 12V/1A, 100-240VAC, 50-60Hz, Interchangeable head, screw-in connector
  • Product Dimensions: 6.25” x 1.1” x 3.1”
  • Packaging Dimensions: 9.8” x 4.5” x 3.35”
  • Product Weight: 0.9 lb
  • Shipping Weight: 1.5 lb
  • BTU: 30.7 per hour
  • Operating Temperature: 150° F (65.5° C)
  • Surface Temperature: 104° F (40° C) at 77° F (room temperature)
  • USB Data Cable 6ft, A to Micro (qty 1)
  • 3-pin phoenix terminal (qty 2)
  • IR Sensor with stripped wire. Red = +5V Sensor power, Black = Ground, White = IR Signal (qty 1)
  • IR Emitter with stripped wire. Stripe = Signal, Solid = IR Ground. Model KDIRE183W (qty 1)
  • L-Bracket Mount (qty 2)
  • Screws for L-Bracket (qty 4)
  • Operation User Manual (qty 1)
  • POWER SOLD SEPATELY. If needed, model KDPS20W12VC. 2V/1.66A, 20W, desktop type.
Guarantee Logo
Where to Buy

Need to find a Key Digital distributor or a system integrator?

Call Sales at +1 914-667-9700 or

Email Sales Team

Need Help with System Design?

FREE Expert System Design Services for Key Digital Dealers & Resellers.

Let us help: +1 914-667-9700 or

Get Help with System Design