KeyDigital Logo
Discontinued > Discontinued
KD-X444S-Tx-and-Rx-front-and-rear
KD-X444S-Tx-front-and-rear
KD-X444S-Rx-front-and-rear
KD-X444S-example-diagram
KD-X444S-Tx-and-Rx-front-and-rear
KD-X444S-Tx-front-and-rear
KD-X444S-Rx-front-and-rear
KD-X444S-example-diagram

KD-X444S

HDMI over 40m CAT6 HDBaseT Extender Set. DISCONTINUED - SUGGESTED REPLACEMENT KD-X444SP.

  • Extends 4K 18Gbps signals up to 130ft / 40m and 1080p signals up to 230ft / 70m

  • Supports 4K HDMI signals up to 18Gbps with HDR, HDCP 2.2, and surround audio up to Dolby® 7.1 and Atmos / DTS-HD

  • Kit includes transmitter, receiver, power supply, IR emitter, and IR sensor

  • Only requires power supply on one unit


Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2
overview
resources
specS & accessories

introduction

KD-X444S is an HDCP2.2 compliant long range HDBaseT kit (Tx + Rx) with support of 18Gbps 4K/UHD signal extension for the latest digital video standards. In addition to HDMI video and audio signals, KD-X444S carries IR and RS-232 for controlling remotely located equipment.

Features

  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
  • Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx
  • Low Profile: Super slim chassis design
  • Signal Extension: 4K/UHD up to 130 ft (40m) using CAT5e/6. 1080p up to 230 ft. (70m) maximum (Valens VS10)
  • IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Surround Audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™

Additional Features

  • HDR (High Dynamic Range): More life-like images through a greater range of luminance levels
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant+
  • 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
  • Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
  • CEC Pass-thru: For inter-device control between input and output HDMI channel
  • EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx -Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
  • Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units

downloads

KD-X444S_h.jpg
KD-X444S_Manual.pdf
KD-X444S_CatalogPage.pdf

Diagrams

KD-X444S_AppExample.pdf

specifications

Technical:
  • Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
  • Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232
  • Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232
  • Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
  • Bandwidth: TMDS bandwidth 18Gbps 
  • Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color 
  • DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source 
  • HDMI Connector: Type A, 19 Pin Female
  • RJ45 Connector: Shielded Link Connector, HDBaseT
  • IR Connector: 4-pin Phoenix
  • RS-232 Connector: 3-pin Phoenix
  • Power: (1) 12V/1.66A, 20W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS20W12VQ
General:
  • Regulation: CE, RoHS, WEEE, EAC
  • Enclosure: Black Metal
  • Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs

accessories

  • Power Supply (qty 1) 12V/1.66A, 20W, desktop type, model KDSP20W12VC 
  • Mounting Brackets (qty 4)
  • IR Emitter with stripped wire. Stripe = IR Signal, Solid = Ground. Model KDIRE3501F1 (qty 1)
  • IR Sensor with stripped wire. Red = +5V Sensor power, Black = Ground, White = IR Signal. Model KDIRSR001 (qty 1)
  • 3-pin Phoenix Connector (qty 2)
  • 4-pin Phoenix Connector (qty 2)

technical documents

KD-X444S_h.jpg
KD-X444S_Manual.pdf
KD-X444S_CatalogPage.pdf

Images and Diagrams

KD-X444S_AppExample.pdf

specifications

Technical:
  • Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
  • Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232
  • Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232
  • Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
  • Bandwidth: TMDS bandwidth 18Gbps 
  • Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color 
  • DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source 
  • HDMI Connector: Type A, 19 Pin Female
  • RJ45 Connector: Shielded Link Connector, HDBaseT
  • IR Connector: 4-pin Phoenix
  • RS-232 Connector: 3-pin Phoenix
  • Power: (1) 12V/1.66A, 20W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. SKU: KD-PS20W12VQ
General:
  • Regulation: CE, RoHS, WEEE, EAC
  • Enclosure: Black Metal
  • Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs

accessories

  • Power Supply (qty 1) 12V/1.66A, 20W, desktop type, model KDSP20W12VC 
  • Mounting Brackets (qty 4)
  • IR Emitter with stripped wire. Stripe = IR Signal, Solid = Ground. Model KDIRE3501F1 (qty 1)
  • IR Sensor with stripped wire. Red = +5V Sensor power, Black = Ground, White = IR Signal. Model KDIRSR001 (qty 1)
  • 3-pin Phoenix Connector (qty 2)
  • 4-pin Phoenix Connector (qty 2)
purchased together
similar products