-
Products
+
-
Products
- New Products
- AV over IP Solutions
- Unified Communication & Collaboration Solutions
- Digital Video Processing Solutions
- Control Systems & Software
- Matrix Switchers
- HDMI Switchers
- HDMI Distribution Amplifiers
- Wireless AV Solutions
- HDMI over CAT6 Extenders
- HDMI Fixers & Boosters
- HDMI Cables
- Active Optical HDMI Fiber Cables
- Audio Solutions
- Accessories
-
Key Digital AV Over IP Systems
- AV Over IP Systems Overview
- AV Over IP Products
- DIY AV Over IP Systems
- Control Apps and Software
-
-
Markets & Solutions
+
- KD University
-
Resources
+
- About Us +
- Contact +
KD-4KWHCEX
HDMI 4K 60Hz 100 ft Wireless Extender KIT with IR -
100ft / 30m wireless HDMI signal extension
4K Signals with HDR, HDCP2.2
Utilizes 5G WiFi Technology for reliable transmission
IR Signal Extension for source control
Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2
Email Sales or call us or at +1 914-667-9700 Opt2
where to purchase
introduction
KD-4KWHCEX is a wireless HDMI extender kit with support for resolutions up to 4K. The innovative technology behind KD-4KWHCEX reliably extends HDMI signals with the latest standards - up to 3840x2160 resolution, HDR, 4:4:4 chroma, and deep color – for an effortless solution ideal for temporary and permanent installation in presentation spaces, outdoor AV setups, and all environments where running a new wire is not possible.
KD-4KWHCEX features an HDMI pass-through port for connecting a local monitor or sending audio into an AV receiver. Additionally, the included IR sensor and emitter allow for control of the connected HDMI source devices such as cable boxes or streamers.
Features
Wireless Extension: Great for temporary setups or installations where new wiring is not possible.
4K Resolution Support: Up to 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth) and backward compatible.
Signal Distance: 100ft / 30m extension with optimal quality. Up to 164ft / 50m capable in ideal environments.
5G WiFi Technology: Transmits through walls and ceilings with minimal range loss and maximum resistance to wireless interference.
IR Control Extension: Sensor at Rx unit collects IR signals from device remote to control source equipment at Tx unit with IR emitter.
HDMI Pass-Through: Ideal for local monitor or connection into AV receivers
Surround and 2ch Audio Support: Pass-through port supports up to Dolby®, DTS™ (formats up to 5.1/6.1). 2ch audio maximum support via wireless extension to Rx unit.
Point-to-Point: Pairing of up 4 extender sets using 4 unique channels possible within the same job site.
Complete Kit: Includes transmitter, receiver, power supplies, IR sensor, IR emitter, antennae, mounting brackets and screws.
Additional Features
- HDR (High Dynamic Range): More life-like images through a greater range of luminance
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- Visually Lossless Compression: 18G enabling technology allows wireless extension of HDMI signals with latest resolution and features
- HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
- HDCP Authentication: HDCP sources are authenticated by the HDCP key on transmit unit, for one-to-one topology
- AV Signal Regeneration: Re-clocking of TMDS (AV signal) channel data at Transmit unit for brand-new AV signal
downloads
4KWHCEX_Wireless_1x4.pdf
Manual_4KWHCEX.pdf
KD-4KWHCEX_Flyers_8.5x11.pdf
specifications
Technical
Supported TMDS Bandwidth: 18Gbps
Supported Resolutions: 3840x2160@24/30/50/60Hz, 2560x1600, 2560x1440, 1920x1200, 1080P@50/60Hz, 720P@50/60Hz,
Deep Color Support: Up to 12 bits per color
DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
Signal Extension Distance: ≤50m / 164ft
Signal latency: ≤100ms
DDC Signal (Data): 5 Volts p-p (TTL)
TMDS HDMI Video/Audio Signal: 0.7 - 1.2 Volts p-p
HDCP Support: HDCP 1.4, HCP 2.2
Supported WiFi Frequencies: 5.18, 5.20, 5.22, 5.24 GHz with SSID Pairing supported
HDMI Connector: Type A, 19 Pin Female
IR In & Out Connectors (Each): 3.5mm
Power Supply: (2) 5V/2A, 10W DC Power Supply. 100-240VAC, 50-60Hz. Model KD-PS12V2ASC.
Power Consumption: Tx: ≤6W, Rx: ≤4W
General
Enclosure: Black Metal
Tx & Rx Unit Dimensions (ea) (LxWxH): 4.53” x 4.92” x 0.81” (115 x 125 x 20.6mm)
Product Weight (ea): Tx: 0.78lbs (353g), RX: 0.76lbs (346g)
Package Dimensions (LxWxH): 6.04” x 14.06” x 3.35” (153.5 x 357 x 85mm)
Package Weight: 2.65 lbs (1.2 KG)
Operating Temperature: -4~140°F / -20~60°C
accessories
Included in the Box:
Qty 2) 5V/2A, 24W DC Power Supply. Model KD-PS5V2A
Qty 4) Antenna
Qty 1) IR Sensor
Qty 1) IR Emitter
Qty 4) Mounting L-Bracket
Qty 10) Mounting Screw
Qty 2) Grounding Screw
specifications
Technical
Supported TMDS Bandwidth: 18Gbps
Supported Resolutions: 3840x2160@24/30/50/60Hz, 2560x1600, 2560x1440, 1920x1200, 1080P@50/60Hz, 720P@50/60Hz,
Deep Color Support: Up to 12 bits per color
DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
Signal Extension Distance: ≤50m / 164ft
Signal latency: ≤100ms
DDC Signal (Data): 5 Volts p-p (TTL)
TMDS HDMI Video/Audio Signal: 0.7 - 1.2 Volts p-p
HDCP Support: HDCP 1.4, HCP 2.2
Supported WiFi Frequencies: 5.18, 5.20, 5.22, 5.24 GHz with SSID Pairing supported
HDMI Connector: Type A, 19 Pin Female
IR In & Out Connectors (Each): 3.5mm
Power Supply: (2) 5V/2A, 10W DC Power Supply. 100-240VAC, 50-60Hz. Model KD-PS12V2ASC.
Power Consumption: Tx: ≤6W, Rx: ≤4W
General
Enclosure: Black Metal
Tx & Rx Unit Dimensions (ea) (LxWxH): 4.53” x 4.92” x 0.81” (115 x 125 x 20.6mm)
Product Weight (ea): Tx: 0.78lbs (353g), RX: 0.76lbs (346g)
Package Dimensions (LxWxH): 6.04” x 14.06” x 3.35” (153.5 x 357 x 85mm)
Package Weight: 2.65 lbs (1.2 KG)
Operating Temperature: -4~140°F / -20~60°C
accessories
Included in the Box:
Qty 2) 5V/2A, 24W DC Power Supply. Model KD-PS5V2A
Qty 4) Antenna
Qty 1) IR Sensor
Qty 1) IR Emitter
Qty 4) Mounting L-Bracket
Qty 10) Mounting Screw
Qty 2) Grounding Screw
