KD-IP1080Rx

1080p AV over IP System Receiver

  • Flexible system that fits your exact system needs for source and display quantities

  • Low bandwidth AV over IP system as compared to 4K systems

  • PoE power adds ease of installation

  • Key Digital iOS App ready, with open API when integrated with KD-CX800 control interface

Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2

introduction

Key Digital’s 1080p AV over IP system, consisting of KD-IP1080Tx & KD-IP1080Rx, may be scaled to fit any installation need. Add a KD-IP1080Tx per video source or KD-IP1080Rx per video display and use a verified network switch as the central point of this HDMI AV routing and distribution system.


Features

  • H.264 Compression: Ideal standard for large video distribution applications

  • Data Stream Bandwidth: < 15Mbps

  • Low-bandwidth System: Supports managed 100BaseT or Gigabit network switches

  • Custom System: Add Tx and Rx extenders to an existing system to expand HDMI over IP up to 1024 Tx units and unlimited amount of Rx units

  • Power Over Ethernet: Carry power to Tx and Rx units with a Power Over Ethernet enabled Smart Managed Switch

  • Signal Extension: Up to 400 ft. @ 1080p@60 (2.25Gbps) using CAT5e/6 UTP/ STP cable

  • Connectivity: Can be connected through a network IP switch or point-to-point

  • Alternative Extension Methods: Enabled by low-bandwidth data streaming technology. Wifi Extender up to 100 ft, IP over Coaxial: Up to 1000 ft

  • Resolution Support: Supports up to 1080p@60 (2.25Gbps) and compatible with DVI1.0/HDMI/HDCP1.x

  • Audio Format: Supports 2ch PCM at 44.1/48kHz

  • Control System Support: Key Digital® app ready. Key Digital Management Software™ Pro (KDMS™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.

  • Source/Display Control: Integrate with KD-CX800 to add 3 IR, RS-232 or Trigger ports

  • Key Digital App Ready: Can be controlled over TCP/IP via Key Digital® App

  • Control App Stabilization: One KD-CX800 or KD-MC1000 control gateway required for control by professional control system.

Additional Features

  • Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake

  • EDID: EDID libraries readily available to provide the best setup per source

  • Deep Color Support: Up to 12 bits/color

  • TMDS re-clocking: Support for long HDMI runs using Key Digital® HDMI cables

  • Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDMI 1.4 and HDCP 1.4

downloads

AVoIP_1080_QSG_1Pg.pdf
AVoIP KD-IP1080 Configuration Questionnaire.pdf
KD-IP1080Rx_h.jpg
Verified_Network_Switches.pdf
IP1080_System_Setup_KDMS_Pro.pdf
KD-IP1080_Manual.pdf
KD-IP1080_CatalogPage.pdf

Diagrams

KD-IP1080 Usage Modes.pdf
KD-IP1080_AppExample.pdf

control drivers

KD-IP92216x16_Savant.zip
Key Digital KDHD8x8 Matrix ip_URC.cd2
Elan_KD20x22_Matrix.zip
KeyDigital_KD-AVoIP.c4z

specifications

Technical:

  • Tx Input: 1 HDMI Connector, Type A, 19 Pin Female
  • Tx Output: 1 HDMI Connector, Type A, 19 Pin Female; 1 CAT5e/6 on RJ45
  • Rx Input: 1 CAT5e/6 on RJ45
  • Tx Output: 1 HDMI Connector, Type A, 19 Pin Female
  • RJ45 LAN: Shielded TCP/IP 1G/100BaseT, PoE
  • TMDS Bandwidth: 2.25 Gb/s per Channel
  • Deep Color Support: Supports digital video formats in Deep Color Mode up to 12 bits/color
  • Link: Single Link
  • DDC Signal (Data): Input DDC signal – 5 Volts p-p (TTL)
  • HDMI Video/Audio Signal: 1.2 Volts p-p
  • DDC Communication: EDID and HDCP buffering between source and display
  • Power: KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head, screw-in connector. KD-IP1080POE POE power consumption ≤ 6 watts per unit

General:

  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal
  • Rack Mount: 3U with KD-RK120PLT bracket (sold separately)
  • Product (Each): 4.74” x 3.11” x 1.16”, Weight: 0.6 lbs
  • Packaging: 6.2” x 4.2” x 3.7”
  • Weight: 2 lbs

accessories

  • Power Supply (qty 1) 5V/2A, 10W, wall type, model KDPS5V2ASC
  • Shelf-mount: L brackets
  • Operating Instructions
  • Warranty Card

specifications

Technical:

  • Tx Input: 1 HDMI Connector, Type A, 19 Pin Female
  • Tx Output: 1 HDMI Connector, Type A, 19 Pin Female; 1 CAT5e/6 on RJ45
  • Rx Input: 1 CAT5e/6 on RJ45
  • Tx Output: 1 HDMI Connector, Type A, 19 Pin Female
  • RJ45 LAN: Shielded TCP/IP 1G/100BaseT, PoE
  • TMDS Bandwidth: 2.25 Gb/s per Channel
  • Deep Color Support: Supports digital video formats in Deep Color Mode up to 12 bits/color
  • Link: Single Link
  • DDC Signal (Data): Input DDC signal – 5 Volts p-p (TTL)
  • HDMI Video/Audio Signal: 1.2 Volts p-p
  • DDC Communication: EDID and HDCP buffering between source and display
  • Power: KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head, screw-in connector. KD-IP1080POE POE power consumption ≤ 6 watts per unit

General:

  • Regulation: CE, RoHS, WEEE
  • Enclosure: Black Metal
  • Rack Mount: 3U with KD-RK120PLT bracket (sold separately)
  • Product (Each): 4.74” x 3.11” x 1.16”, Weight: 0.6 lbs
  • Packaging: 6.2” x 4.2” x 3.7”
  • Weight: 2 lbs

accessories

  • Power Supply (qty 1) 5V/2A, 10W, wall type, model KDPS5V2ASC
  • Shelf-mount: L brackets
  • Operating Instructions
  • Warranty Card