-
Products+
-
Products
- New Products
- AV over IP Solutions
- Unified Communication & Collaboration Solutions
- Digital Video Processing Solutions
- Control Systems & Software
- Matrix Switchers
- HDMI Switchers
- HDMI Distribution Amplifiers
- Wireless AV Solutions
- HDMI over CAT6 Extenders
- HDMI Fixers & Boosters
- HDMI Cables
- Active Optical HDMI Fiber Cables
- Audio Solutions
- Accessories
-
Key Digital AV Over IP Systems
- AV Over IP Systems Overview
- AV Over IP Products
- DIY AV Over IP Systems
- Control Apps and Software
-
-
Markets & Solutions+
- KD University
-
Resources+
- About Us+
- Contact+
KD-X411POHK
Power over HDBaseT/HDMI via Single CAT5e/6 (Tx + Rx Set) Extenders with Audio De-Embedding, HDCP2.2, 4K
Sales Team is here to help you with an integration question or to find a distributor:
Email Sales or call us or at +1 914-667-9700 Opt2
Email Sales or call us or at +1 914-667-9700 Opt2
where to purchase
introduction
Features
Key Features:
- Power over HDBaseT: Features power extension from Tx to Rx, Rx unit does not require power supply
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
- Signal Extension:
- Up to 150 ft. @ 4K/24/25/30/60 using KD-CAT6STP1X cabling
- Up to 125 ft. @ 4K/24/25/30/60 using third-party CAT5e/6 UTP/STP
- Up to 250 ft. @ 1080p/1920x1200 using KD-CAT6STP1X cabling
- Up to 230 ft. @ 1080p/1920x1200 using third-party CAT5e/6 UTP/STP
- 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
- Audio De-Embedding: Audio from the HDMI input is de-embedded through the Coax digital (PCM) and/or Analog L/R audio output
- HDMI® and HDCP Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDCP 2.2 and HDMI 2.0 4:2:0/8 Bit profile
- EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
- Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, and EDID Control handshake, Hot Plug control
- IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on 3.5mm connector
- Rotary SwitchRS-232 Control Mode: Provides control of Tx unit
- 3D: Support for standard 3D stereoscopic signal formats
- Deep Color Support: 12bit Deep Color video / 8bit color for 4K/UHD.
- Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus and DTS-HD Master Audio™
- CEC Support: For inter-device control between main input and output HDMI channel
- I2C Communication: EDID and HDCP authentication to Display and Source
- Control System Support: Compatible with Compass Control®, AMX®, Control4®, Crestron®, RTI®, Savant, URC®, Leviton® etc.
